STMicroelectronicsSTM32373C-EVALEingebettete Systementwicklungsboards und -kits
STM32F373VCT6 Microcontroller Evaluation Board 32KB RAM 256KB EEPROM/Flash
Compliant | |
3A991a.2. | |
Active | |
8473.30.11.80 | |
Automotive | No |
PPAP | No |
Evaluation Board | |
STM32F373VCT6 | |
Microcontroller | |
32KB | |
256KB | |
EEPROM/Flash | |
3 | |
1 | |
1 | |
1 | |
1 | |
2 | |
LCD | |
micro SD | |
EEPROM/Flash | |
Yes |
If your project requires microprocessor-based functionality, this STM32373C-EVAL embedded system development board from STMicroelectronics is for you. Its eeprom/flash program memory is 256KB.
Entwicklungskit-Beschreibung
The STM32373C-EVAL evaluation board is designed as a complete demonstration and development platform for STMicroelectronics ARM Cortex-M4 core-based STM32F373VCT6 microcontroller. It features two I2Cs, three SPIs, three USARTs, one CAN, one CEC controller, one 12-bit ADC, three 16-bit sigma delta ADCs, three 12-bit DACs, internal 32-KByte SRAM and 256-KByte Flash, touch sensing slider, USB FS, and JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as the final application.
Entwicklungskit-Funktionen
- STM32F373VCT6 microcontroller
- Four 5 V power supply options:Power jackST-LINK/V2 USB connectorUser USB connectorDaughter board
- Audio jack connected to I2S DAC
- Microphone connected to ADC through an amplifier
- 2-GByte (or more) MicroSD card on SPI
- Three components on I2C bus: temperature sensor, EEPROM and dual interface RF EEPROM
- RS-232 communication configurable for communication of Flash loader
- IrDA transceiver
- 240x320 TFT color LCD connected to SPI interface
- Joystick with 4-direction control and selector
- Reset, Wakeup or Tamper, and Key buttons
- 4 color user LEDs
- 2 LEDs for MCU power range indicator
- ECG, pressure sensor and PT100 temperature sensor connected to the 16-bit Sigma Delta ADC of STM32F373VCT6
- Extension connectors for daughter board or wrapping board
- MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
- USB FS connector
- Touch slider
- RTC with backup battery
- CAN 2.0 A/B compliant connection
- Light dependent resistor (LDR)
- Two HDMI connectors with DDC and CEC
- IR transmitter and receiver
- Two ADC & DAC input and output signal connectors and one Sigma Delta ADC input signal connector
- Potentiometer
- JTAG/SWD and ETM trace debug support
- Embedded ST-LINK/V2
Weitere Informationen zum Entwicklungskit