Infineon Technologies AGTLE4284DV33ATMA1Linear Regulators
LDO Regulator Pos 3.3V 1A Automotive AEC-Q100 3-Pin(2+Tab) DPAK T/R
| Compliant with Exemption | |
| EAR99 | |
| LTB | |
| 8542.39.00.60 | |
| SVHC | Yes |
| SVHC überschreitet Schwellenwert | Yes |
| Automotive | Yes |
| PPAP | Unknown |
| LDO | |
| 1 | |
| Positive | |
| Fixed | |
| 3.3 | |
| 1 | |
| -0.3 | |
| 40 | |
| 1.2@100mA|1.35@800mA|1.3@500mA|1.4@1A | |
| 50mV | |
| 16mV | |
| 144K/W | |
| 4K/W | |
| Current Limit|Short Circuit Protection|Thermal Protection | |
| -40 | |
| 150 | |
| Automotive | |
| Tape and Reel | |
| Befestigung | Surface Mount |
| Verpackungshöhe | 2.3 |
| Verpackungsbreite | 6.22 |
| Verpackungslänge | 6.5 |
| Leiterplatte geändert | 2 |
| Tab | Tab |
| Standard-Verpackungsname | TO-252 |
| Lieferantenverpackung | DPAK |
| 3 | |
| Leitungsform | Gull-wing |
Stable voltages are always needed for sensitive systems implement this LDO TLE4284DV33ATMA1 linear regulator from Infineon Technologies. Its typical dropout voltage at current is 1@100mA|1.05@500mA|1.1@800mA|1.3@1A V. This voltage regulation device's single output can produce a current up to 1 A. The best way to provide power to your application is by using this, which needs a voltage of at least -0.3 V and no higher than 40 V. With a fixed output that has a voltage of 3.3 V, this is power management at its best. At a load regulation of 16mV and line regulation of 50mV your circuit is capable of maintaining a constant voltage level at your output. Its polarity is positive. The maximum dropout voltage is 1.2@100mA|1.3@500mA|1.35@800mA|1.4@1A V. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 150 °C.
| EDA / CAD Models |